1“三好”：管好、用好、维修好。

1 "three good": good management, good use, good maintenance.

2“四会”：会使用、会保养、会检查、会排除故障。

2 "four meetings": will be used, will maintain, will check, will eliminate the failure.

五项纪律

Five disciplines

1

One

凭操作证使用设备，遵守安全操作规程。

Use the equipment on the basis of the operating certificate and comply with the safety operation regulations.

2

Two

经常保持设备清洁，并按规定加油。

Keep the equipment clean and refuel according to the regulations.

3

Three

遵守设备交接班制度。

Comply with the system of handover of equipment.

4

Four

管理好工具、附件，不得遗失。

The management of tools and accessories shall not be lost.

5

Five

发现异常，立即停机，自己不能处理的问题应及时通知有关人员检查处理。

Find out the abnormal, stop immediately, the problem that can't handle, should notify the personnel concerned in time.

四项要求

Four requirements

1

One

整齐：工具、工件、附件放置整齐，安全防护装置齐全，线路、管道安全完整。

Neatly: tools, workpieces, accessories are placed neatly, safe and protective devices are complete, and the lines and pipes are safe and complete.

2

Two

清洁：设备内外清洁，各部位不漏水、不漏油。

Clean: the equipment inside and outside clean, all parts do not leak, no oil leakage.

3

Three

润滑：按时加油、换油，油质符合要求，油壶、油枪和油杯齐全，油毡、油线、油标清洁，油路畅通。

Time: oil, oil, lubricating oil, oil and oil can meet the requirements of the oil cup is complete, linoleum, oil line, oil standard clean, smooth circuit.

4

Four

安全：实行定人定机、凭证操作和交接班制度，熟悉设备结构和遵守操作规程，合理使用、精心维护、安全无事故。

Safety: implementation of the system of setting up personnel, voucher operation and shift scheduling, familiarity with equipment structure and operation procedures, reasonable use, careful maintenance, safety and no accidents.